These Thermowells are turned & drilled from solid bar stock. This enables them to be placed within processes which experience or operate under high pressure. They consist of a stainless steel shaft which can be straight or tapered. There is a weld collar to facilitate the thermowell to be welded in to the process & an internal instrument connection thread. The bore is drilled out to 0.3mm larger than the intended sensor to be assembled giving a snug fit to encourage good thermal conductivity.

Thermowell Solid Drilled Weld In

©Industrial Temperature Sensors Ltd.      

Ph.00353-45-408164     Fax.00353-45-408165