Industrial Temperature Sensors Calibration Equipment


T4200
	The ATP 4200 is designed for precise temperature measurements as demanded in laboratory use and quality assurance (ISO 9000, etc.).The conversion of the resistance measuring value into a temperature measuring value is practised by use of calibration tables in the measuring device depending on the different probe specifications. It is not necessary that the user enters the calibration data after each exchange of the probe using the keyboard built-in the measuring device. As the calibration data of several probes can be stored in the measuring device, in a lot of cases it will be sufficient to relate the corresponding calibration data to that channel to which a new probe had been connected. If the calibration data of a newly connected prove are not yet stored in the measuring device, the user can draw up the calibration data easily on a PC by use of a software included in the scope of supply. The complete drawing up and maintenance of the calibration tables is done on the PC. If required new calibration data can be loaded from the PC into ATP 4200 by use of this PC-software.


T905
	The universally applicable process-controlled hand-held instruments, Series T900, are ideal for measuring operations in which high accuracy counts or the possibility of online documentation is demanded. The two multi-function-instruments are outstanding for their high accuracy of ±0,03°C. You can optional plug in Pt100 or thermocouple (type J, K, L, N, R, S, T), as well as probes for humidity and flow. The high precision makes them eminently suitable as reference instruments for testing subordinate measuring instruments in quality assurance laboratories or for checking temperature-critical processes.


T955
	The universally applicable process-controlled hand-held instruments, Series T900, are ideal for measuring operations in which high accuracy counts or the possibility of online documentation is demanded. The two multi-function-instruments are outstanding for their high accuracy of ±0,03°C. You can optional plug in Pt100 or thermocouple (type J, K, L, N, R, S, T), as well as probes for humidity and flow. The high precision makes them eminently suitable as reference instruments for testing subordinate measuring instruments in quality assurance laboratories or for checking temperature-critical processes.

P795 Precision hand held Thermometer

• 2-channel-instrument, for Pt100 according EN 60751,
• Simultaneous display of two measured values or differential measurement
• Recording maximum, minimum, hold and average values(average over user selectable time)
• Integrated calibration function(According EN60751, up to 20 points) • High measuring accuracy (+ 0,010 °C)
• Resolution of 0.001°C below 200°C
• Password protection for calibration function
• USB interface
• Manufacturers test certificate included
• Data Logger function for up to 4000 measurements
• Optional DKD or ISO- system calibration certification.