Inputs 0/1-5 V; 0/2-10 V
SWT-73
 
Easy programming and installation, small size and high reliability are basic advantages of the SWT-73 temperature meters . Pt100 input has automatic recognition of 3 and 4- conductor connection. The communication interface RS- 485 enables data transmission in production process monitoring systems.
SWT-94
 
The SWT-94 meter has a Pt100 input with automatic recognition of 3 and 4-conductor connection and features full linearization of characteristics . The RS-485 enables data transmission in production process monitoring systems. The indicator is equipped with 3 LED diodes: 2 LEDs are signalling when the threshold values are exceeded and 1 LED is signalling failure in slotted line. temperature
SWE-73-T
 
 
The SWE-73 efficiency indicators are low-cost and affordable panel-mounted digital indicators. They are available in three versions: temperature (-T), current/voltage (-A, description on pages 1.1.3, 1.2.3) and without analog input, only with serial input (-S, description on page 1.4.3). The 16-bit A/D converters used in them ensure very high stability and measurement precision. Parameters can be programmed freely through an infrared link or through the RS-485 interface, built-in as a standard. Configuration of the device can also be programmed to the customer's order. The RS-485 interface makes it easy to set up measurement networks in production process monitoring systems, and also to use the indicators as smart, programmable, digital converters of input signals for computer systems. An additional advantage of the device is that its dimensions are small and it can be easily mounted.
SRT-73
 
Easy programming and installation, small size and high reliability are basic advantages of the SRT-73 temperature meters 1 or 2 relay outputs make it possible to control heating / cooling processes. The RS-485 enables data transmission in production process monitoring systems.
SRT-77
 
The SRT-77 has a Pt100 input with automatic recognition of 3 and 4-conductor connection and features full linearization of characteristics. temperature meter The main advantage of regulator are two rows of display. The first one presents measuring value, second one - programmed values: max and min. 1 or 2 relay outputs make it possible to control heating / cooling processes. The RS-485 enables data transmission in production process monitoring systems.
SRT-94
 
The SRT-94 has a Pt100 input with automatic recognition of 3 and 4-conductor connection and features full linearization of characteristics. A 4-digits, 20- millimetre LED display enables seeing of measured values from a distance. temperature meters The RS-485 enables data transmission in production process monitoring systems. 2 or 4 relay outputs make it possible to adjust the level of the measured signal. The relay output can be controlled according to one or two threshold values.
 
SWT-N118
 
The SWT-N118 temperature meter features easy operation, functional programming menu and a clear 4-decade, 20- millimetre LED display. Pt100 input has automatic recognition of 3 and 4-conductor connection and features full linearization of characteristics. Tight case with high protection class (IP65) makes it an ideal choice for heavy duty applications. The settings can be changed without opening the tight case, by an infrared remote control.
SRT-N118
 

 
 The SRT-N118 temperature meter features easy operation, functional programming menu and a clear 4-decade, 20- millimetre LED display. Tight case with high protection class (IP65) makes it an ideal choice for heavy-duty applications. 1 or 2 relay outputs enable adjustment of the level of the measured signal. The relay output can be controlled according to one or two threshold values. The settings can be changed without opening the tight case, by an infrared remote control.
SRN-94
 

 
 The STN-94 temperature meters is particularly suitable in applications which require quick access to the threshold value with a possibility of its instant modification during measurements. 3 [^] keys enable quick changing of any set value digit, which significantly reduces the time necessary to input a new parameter value. The relay output can be used to heating/cooling type control.
STM-94
 

 
 The STM-94 regulator serves to measure and regulate temperature as well as acting as a timer control. In its metering mode, a green display shows the operating period that has been set and the length of interruption between successive connections, while the red display shows current temperature. Release of the outlets controlling the cooling unit and the agitator is signalled by the LEDs: F (freeze) and M (motor). The regulator works automatically according to the following algorithm:
  • temperature above the upper threshold e cooling unit and agitator permanently connected,
  • temperature below the lower threshold e cooling unit disconnected, agitator connected and operating in a time cycle.
    		•
    SRT-L35
     

     
    		 The SRT-L35 has a Pt100 input with automatic recognition of 3 and 4-conductor connection and features full linearization of characteristics. temperature meter The RS-485 enables data transmission in production process monitoring systems. The nonlinear The power supply is realized by buildsensor characteristic is fully linearizated. in pulse feeder, which gives the correct supply in range 15V ÷ 50V DC or 12V ÷ 35V AC.
    SRT-L70
     

     
    		 The SRT-L70 temperature meter has a Pt100 input. Measuring range contains temperatures: -50°C÷ +550°C with resolution 0,1°C. The nonlinear sensor characteristic is fully linearizated. The additional advantage of this device is automatic recognition of 2, 3 and 4-conductor connection. There is a possibility of access to inner registers via RS-485 interface. The regulator features 3 relay outputs (2 NO and 1 NO-NC). The power supply is realized by build-in pulse feeder, which gives the correct supply in very wide range voltages of 19V ÷ 90V DC; 16V ÷ 70V AC or 85 ÷ 260V AC/DC.

     

    ©Industrial Temperature Sensors Ltd.      

    Ph.00353-45-898164     Fax.00353-45-896521