Inputs 0/1-5 V; 0/2-10 V
SWN-73
 
The SWN-73 with voltage input is a simple digital board process meter featuring programmable measuring range. Its basic advantages are easy programming and installation, small size and high reliability. The 21V ±5V DC output is used to power the measuring transducers. The RS-485 enables data transmission in production process monitoring systems.
SWN-94
 
The SWN-94 process meter allows for connecting measuring sensors which maintain voltage signals, used in automatic systems: 0-5V, 1-5V, 0-10V, 2-10V. The additional advantage is possibility of programming following modes: linear, root, square and user defined (max. 20 points). The 24V DC / 100 mA output is used to power the measuring transducers. The indicator is equipped with 3 LED diodes: 2 LEDs are signalling when the threshold values are exceeded and 1 LED is signalling failure in slotted line.
SWE-73-A
 
 
The SWE-73 efficiency indicators are low-cost and affordable panel-mounted digital indicators. They are available in three versions: current/voltage (-A), temperature (-T, description on page 1.3.3) and without analog input, only with serial input (-S, description on page 1.4.3). The 16-bit A/D converters used in them ensure very high stability and measurement precision. Parameters can be programmed freely through an infrared link or through the RS-485 interface, built-in as a standard. Configuration of the device can also be programmed to the customer's order. The RS-485 interface makes it easy to set up measurement networks in production process monitoring systems, and also to use the indicators as smart, programmable, digital converters of input signals for computer systems. An additional advantage of the device is that its dimensions are small and it can be easily mounted.
SRN-73
 
Easy programming and installation, small size and high reliability are basic advantages of the SRN-73 process meters. 1 or 2 relay outputs make it possible to control processes ON/OFF type. The additional advantage is possibility of programming following modes: linear, root, square and user defined (max. 20 points). The 21V±5VDC / 25mA output is used to power the measuring transducers. The RS-485 enables data transmission in production process monitoring systems.
SRN-77
 
The main advantages of regulator SRN-77 are two rows of display. The first one presents measuring value, second one - programmed values: max and min. 1 or 2 relay outputs make it possible to control processes ON/OFF type. The device is dedicated to applications, where there is necessity of continuous control of the threshold values. The 24V±3VDC output is used to power the measuring transducers. The RS-485 enables data transmission in production process monitoring systems.
SRN-94
 
The SRN-94 process meter features 4-digits, 20-millimetre LED display - possibility of legible readout of measured values from a distance The 24V DC / 100 mA output is used to power the measuring transducers. The RS-485 enables data transmission in production process monitoring systems. 2 or 4 relay outputs make it possible to adjust the level of the measured signal. The relay output can be controlled according to one or two threshold values. The regulator is equiped with a function of measuring signal peak detection and visualization.
 
SRP-N118
 
The SRP-N118 process meter features easy operation, functional programming menu and a clear 4-decade, 20- millimetre LED display. Tight case with high protection class (IP65) makes it an ideal choice for heavy-duty applications. The current input has a protection safeguarding the measuring resistor against damage. The device operates in the following modes: linear, root, square and user defined (max. 20 points). The relay output can be controlled according to one or two threshold values. The settings can be changed without opening the tight case, by an infrared remote control.
SRN-N118
 

 
 The SRN-N118 process meter features easy operation, functional programming menu and a clear 4-decade, 20- millimetre LED display. Tight case with high protection class (IP65) makes it an ideal choice for heavy-duty applications. The device operates in the following modes: linear, root, square and user defined (max. 20 points). The relay output can be controlled according to one or two threshold values. The settings can be changed without opening the tight case, by an infrared remote control.

 

©Industrial Temperature Sensors Ltd.      

Ph.00353-45-898164     Fax.00353-45-896521