Micro Data Logger LogBox-AA

LogBox-AA is an electronic data logger with two input analog channels. Input data is stored in the logger internal memory, for later download to a PC for visualization and analysis in the form of tables or graphs. The data is easily exported to spreadsheets.
The LogChart-II is the software used to configure the logger, download and visualize data. The logger configuration allows defining the logger operation mode, including programming the start/stop time of data acquisition. Other parameters such as signal input type, logging interval, etc, are easily selected through the LogChart-II software.
The LogBox-AA also provides a signal for commanding an external power supply (battery) of a device connected to the logger. This feature allows that external devices, such as a transmitter, be powered only during the measurement sample time, thus extending the autonomy of these external batteries.
Product Details
  • Channel 1: NPN, PNP, Pulse or Dry Contact
      
    • Input: 0-20 mA, 4-20 mA, 0-50 mV and 0-10 Vdc
          

              
      • J range: -50 to 760 °C (-58 to 1400 ºF)
              
      • K range: -90 to 1370 °C (-130 to 2498 ºF)
              
      • T range: -100 to 400 °C (-148 to 752 ºF)
              
      • N range: -90 to 1300 °C (-130 to 2372 ºF)
              
      • R range: 0 to 1760 °C (32 to 3200 ºF)
              
      • S range: 0 to 1760 °C (32 to 3200 ºF)
              
      • B range: 150 to 1820 °C (32 to 3308 ºF)
              
      • Pt100 range: -200.0 to 650.0 °C (-328 to 1202 ºF)
            

        
        
    • Memory capacity: 32k or 64k readings
        
    • Interval between readings: 1 second to 18 hours
        
    • External battery switch time: 0 to 10 s
        
    • Power: Internal 3.6 V lithium battery (1/2 AA)
        
    • Estimated autonomy: Over 2000 days (one daily download)
        
    • Working temperature: From –40 °C to 70 °C
        
    • Protection: IP65, IP67 and IP68 models (see lateral label on product)
        
    • Material: ABC + PC case, Polycarbonate film
        
    • Dimensions: 60 x 70 x 35 mm
LogChart-II Installer - V2.30 PDF - 3.06 Mb 
Download
LogChart for PalmOS V1.36 Installer 
PalmOS software for configuration and data download for the TagTemp, LogBox-RHT, LogBox-DA, LogBox-AA and Penguim Loggers. Compatible Palm devices: Palm III, V and M families, Zire, Zire 21, 31, 71 and 72, Tungsten T, T2, T3, T5, C, E and E2, Palm Z22, Palm TX. LogBox-RHT-LCD users should use the version 1.37 of this software.		 EXE - 10.16 Mb
 Download
LogChart for PalmOS V1.37 Installer 
PalmOS software for configuration and data download for the LogBox-RHT-LCD logger. Compatible Palm devices: Palm III, V and M families, Zire, Zire 21, 31, 71 and 72, Tungsten T, T2, T3, T5, C, E and E2, Palm Z22, Palm TX.		 EXE - 10.16 Mb
 Download
Operating Manual LogBox-AA  PDF - 0.78 Mb
Download 
IR-Link 3 Driver (02/11/2010) PDF - 3.14 Mb
Download 
Data LogBox-AA
 PDF - 0.97 Mb
Download
CE - CE - D.O.C. LogBox-AA  PDF - 0.05 Mb
 Download


©Industrial Temperature Sensors Ltd.      

Ph.00353-45-408164     Fax.00353-45-408165