Micro Data Logger LogBox-DA

Micro Data Logger LogBox-DA LogBox-DA is an electronic data logger with two input channels, one analog and one digital. Input data is stored in the logger internal memory, for later download to a PC for visualization and analysis in the form of tables or graphs. The data is easily exported to spreadsheets. The LogChart-II is the software used to configure the logger, download and visualize data. The logger configuration allows defining the logger operation mode, including programming the start/stop time of data acquisition. Other parameters such as signal input type, logging interval, multiplication factor, scale range, etc, are easily selected through the LogChart-II software. The LogBox-DA also provides a signal for commanding an external power supply (battery) of a device connected to the logger. This feature allows that external devices, such as a transmitter, be powered only during the measurement sample time, thus extending the autonomy of these external batteries.

Product Details
  • Channel 1: NPN, PNP, Pulse or Dry Contact
      
  • Max. frequency: 4000 Hz or 20 Hz
      
  • Maximum counting: 65,535 per period
      
  • Channel 2: 0-20 mA, 4-20 mA, 0-50mV and 0-10 Vdc
      
  • Memory capacity: 32k or 64k readings
      
  • Interval between readings: 1 second to 18 hours
      
  • External battery switch time: 0 to 10 s
      
  • Power: Internal 3.6 V lithium battery (1/2 AA)
      
  • Estimated autonomy: Over 2000 days (one daily download)
      
  • Working temperature: From –40 °C to 70 °C
      
  • Protection: IP65, IP67 and IP68 models (see lateral label on product)
      
  • Material: ABC + PC case, Polycarbonate film
      
  • Dimensions: 60 x 70 x 35 mm
LogChart-II Installer - V2.30 PDF - 3.06 Mb 
Download
LogChart for PalmOS V1.36 Installer 
PalmOS software for configuration and data download for the TagTemp, LogBox-RHT, LogBox-DA, LogBox-AA and Penguim Loggers. Compatible Palm devices: Palm III, V and M families, Zire, Zire 21, 31, 71 and 72, Tungsten T, T2, T3, T5, C, E and E2, Palm Z22, Palm TX. LogBox-RHT-LCD users should use the version 1.37 of this software.		 EXE - 10.16 Mb
 Download
LogChart for PalmOS V1.37 Installer 
PalmOS software for configuration and data download for the LogBox-RHT-LCD logger. Compatible Palm devices: Palm III, V and M families, Zire, Zire 21, 31, 71 and 72, Tungsten T, T2, T3, T5, C, E and E2, Palm Z22, Palm TX.		 EXE - 10.16 Mb
 Download
Operating Manual LogBox-DA  PDF - 0.86 Mb
Download 
IR-Link 3 Driver (02/11/2010) PDF - 3.14 Mb
Download 
Data LogBox-DA
USB driver for the IrLink3 interface. Usage instructions: Unpack all files to a temporary folder, plug the IrLInk3 interface in a USB port. The Windows New Hardware Wizard will ask for a driver. Select the manual installation option and enter the path to the unpacked files. Follow the Wizard instructions to finish installation.		 PDF - 1.16 Mb
Download
CE - CE - D.O.C. LogBox-DA  PDF - 0.06 Mb
 Download


©Industrial Temperature Sensors Ltd.      

Ph.00353-45-408164     Fax.00353-45-408165