Temperature Sensors
This sensor assembly is generally used within a cold room environment. It consists of a Pt100 sensing element housed in a stainless steel protective sheath. The termination head is ABS Plastic box of dimension 80mm Sq with a screw cap & it can also be direct wall mounted.
This sensor assembly is a very common one used in many process applications. It consists of a Pt100 sensing element housed in a stainless steel protective sheath and terminated within a termination head which can be Aluminium, Plastic or Stainless Steel. Although various probe lengths may be specified some common lengths are readily available from stock. There are some options available as regards to termination & output such as ceramic termination block or a 4-20mA output head mounted temperature transmitter.
This sensor assembly is a very common one used in many process applications. It consists of a Pt100 sensing element housed in a stainless steel protective sheath with a process thread fixed below the termination head which can be Aluminium, Plastic or Stainless Steel. 6mm would be a standard diameter for this probe and some stock lengths are 100mm up to 300mm in increments of 50mm. Other diameters & lengths are also available
This sensor assembly is a very common one used in many process applications. It consists of a Pt100 sensing element housed in a stainless steel protective sheath with a fixed process thread & a 50mm lag below the termination head which can be Aluminium, Plastic or Stainless Steel. 6mm would be a standard diameter for this probe and some stock lengths are 100mm up to 300mm in increments of 50mm. Other diameters & lengths are also available
This sensor assembly is generally used within the dairy, brewery & pharmaceutical industry where a sanitary process connection is required. It consists of a Pt100 sensing element housed in a stainless steel protective sheath with a Tri-Clover ferrule process connection & a lag/standoff. These assemblies are generally of a high surface finish as required for such processes. The termination head which can be Aluminium, Plastic or Stainless Steel.
This sensor assembly is generally used within the dairy, brewery & pharmaceutical industry where a sanitary process connection is required. It consists of a Pt100 sensing element housed in a stainless steel protective sheath with a floating nut which locks upon a measured collar & a lag/standoff. These assemblies are generally of a high surface finish as required for such processes. The termination head which can be Aluminium, Plastic or Stainless Steel.
This sensor assembly is generally used within the dairy, brewery & pharmaceutical industry where a sanitary process connection is required. It consists of a Pt100 sensing element housed in a stainless steel protective sheath with a floating Din 11851 style fitting & a lag/standoff. These assemblies are generally of a high surface finish as required for such processes. The termination head which can be Aluminium, Plastic or Stainless Steel.
This sensor assembly is generally used within the dairy, brewery & pharmaceutical industry where a sanitary process connection is required. It consists of a Pt100 sensing element housed in a stainless steel protective sheath with a floating 3/8"BSP nut which the 3/8"BSP weld socket mates with on a tolerance controlled shaft with a rubber O-ring to complete the seal. These assemblies are generally of a high surface finish as required for such processes. The termination head which can be Aluminium, Plastic or Stainless Steel
This sensor assembly is generally used within a cold room environment. It consists of a Pt100 sensing element housed in a stainless steel protective sheath with an additional perforated protection sheath. The termination head is Aluminium with a screw cap & it also has two mounting lugs to enable direct wall mounting.
This series temperature sensor is a product designed for measurement of indoor or outdoor environmental temperature. It consists of a Pt100 temperature sensor housed in a 316 L Stainless Steel probe. It has a 6mm diameter stem with a probe length of 50mm. Housed in an ABS connection head.. These probes can be used as stand-alone sensors, or they can be configured with a variety of termination options, and combined with controllers, indicators, or temperature transmitter to create complete measurement systems.
This sensor assembly is generally used to measure/monitor the air temperature of an office, room, corridor etc. It consists of a Pt100 sensing element housed within an ABS plastic perforated termination box of dimension 80mm Sq with a click snap cap & it can also be direct wall mounted.
Integral 4-Pin M12 Male Connector for Easy Installation. An M12 Extension Cable is Required for Installation. Available With a Variety 316L Threaded and Non-Threaded Housings Pt100 or Pt1000 Class A, 4-Wire Platinum RTD Elements per IEC60751 Standard Available with 6mm and 3mm Probe Diameters and a Wide Variety of Standard Lengths 2, 3 or 4-Wire Requirement. Temperature Range -100 to 250°C Sensing End, 85°C Max at Connector
Temperature Sensor with Pipe Clamp This sensor assembly is used within various applications & environments for pipe surface Measurement. It consists of a Pt100 sensing element housed in a stainless steel 316L protective sheath. An extension union nipple union connects the clamp to the termination head which houses the spring loaded sensor insert. The tip of the sensor is flat and temperature sensitive for measuring pipe surface. The clamp is available in for various pipe diameters.
This sensor assembly has is used within various applications & environments. It consists of a Pt100 sensing element housed in a stainless steel 316L protective sheath . The extension cable can be silicon rubber, PVC or PTFE, dependant upon operating conditions. Both the sheath & the cable length can be specified to the required length.
Mineral Insulated Pt100 Probe With Extension Lead Mineral Insulated Resistance Thermometers are for use up to 500°C depending on the configuration. They are rugged, steel sheathed probes with flexible sheaths allowing bending or forming. They offer long life (depending on use) are resistant to vibration and can be used in high pressure applications.
Temperature Sensor PT100 which consists of a Pt100 sensing element housed in a stainless steel 316L protective sheath. The Termination of the PT100 sensor is via a high specification Lemo connector which is used to connect the sensor to process or instrumentation. We offer various models of the Lemo connector to suit an array of instruments
Suitable for plastic machinery and general purpose applications, these assemblies are supplied with a 200mm spring with an industry standard slotted adjustable bayonet cap fitting which is screw adjustable on the spring. The fitting can be fine tuned for positioning on site and is suitable where several applications in your plant require individual positioning of the sensor. The sensing tip is available in various diameters and the sensor comes with required length of extension cable from the probe.
Surface temperature measurement for pipes, tanks & motor casings etc. It consists of a Pt100 sensing element housed in a rugged silicon rubber self adhesive patch. Operating temperature of up to 200C. The extension cable extension is silicon rubber,. The extension cable length can be specified to the required length in meters.
Surface temperature measurement of ferrous materials for pipes, tanks & motor casings etc. It consists of a Pt100 sensing spring loaded surface disc housed within a button magnet for magnetic connection to the measurement surface. Operating temperature of up to 250C. The extension cable extension is PFA & the cable length can be specified to the required length in meters. Thermocouple versions also available.
This sensor assembly is used within various applications & environments for pipe surface measurement. It consists of a Pt100 sensing element housed in a stainless steel 316L protective sheath with disc temperature sensitive tip which contacts the pipe upon mounting. The Jubilee is available in various pipe diameters and is adjustable. Thermocouple versions also available.
These sensor assemblies are generally supplied to suit thermo pockets or thermowells but are also supplied as replacements or to suit existing thermo pockets & thermowells. It consists of a temperature sensing element housed in a stainless steel protective sheath and are spring loaded to ensure bottoming. They can be terminated with termination block, 4/20mA temperature transmitter or with flying leads to connect to existing unit. Available with PT100,PT1000,Thermocouple or NTC Thermistor.
These flexible PFA insulated sensors are ideally suited to applications which require resistance to attack from virtually all known chemicals, oils and fluids.
The harsh conditions found in the autoclave chambers and of sterilisers require a reliable sensor as all too often sensors can fail through ingress of moisture. Our Hermetically Sealed probes offers a reliable solution to the problem. Supplied as a PT100 sensor, it incorporates a complete seal via PFA tubing along the entire length of the sensor with a heavy duty stainless steel flexible conduit over protection.
Simple PFA & Fibreglass insulated thermocouple for very fast response.
These thermocouples are suitable for surface monitoring of many applications including platens, pipes and vessels up to a maximum operating temperature of 400ºC
High Temperature Ceramic Thermocouple Sensor
Twin Bore Ceramic Thermocouple Elements
Heavy Duty Industrial Thermocouple
This sensor assembly is a very common one used in many process applications. It consists of a Pt100 sensing element housed in a stainless steel protective sheath with a fixed process thread for ease of installation.
Suitable for plastics machinery and general purpose applications, these assemblies are supplied with a spring & adjustable bayonet cap fitting is screwed onto for fine positioning on site. The sensing tip is incorporated within a tube which the stainless steel braided leads are sealed into.
General purpose rugged thermocouple with grounded hot junction for fast response suitable for air or immersion temperature measurement
This series of temperature sensor is a general purpose product designed for use in the process industry where increased temperature sensitivity is required. It consists of a unique small mass Pt100 temperature sensor housed in a 316 L Stainless Steel probe, this reduces the insertion length required and increases the sensitivity of measure. It has a variable diameter stem with custom choice of probe length. Housed in an aluminium alloy connection head. Compression fittings are also available for installation. These probes can be used as stand-alone sensors, or they can be configured with a variety of termination options, and combined with controllers, indicators, or temperature transmitter to create complete measurement systems.
This sensor assembly is generally used within the dairy, brewery & pharmaceutical industry where a sanitary process connection is required. It consists of a Pt100 sensing element housed in a stainless steel protective sheath with a 3A/DN38 ferrule process connection & a lag/standoff. These assemblies are generally of a high surface finish as required for such processes. The termination head which can be Aluminium, Plastic or Stainless Steel.
This sensor assembly is generally used within the dairy, brewery & pharmaceutical industry where a sanitary process connection is required. It consists of a Pt100 sensing element housed in a stainless steel protective sheath with a 3A/DN38 ferrule process connection & a lag/standoff. These assemblies are generally of a high surface finish as required for such processes. The termination which can be M12 socket connector or extension cable. These sensors are also available with integral 4/20mA transducer.