Pulse Counters
SLE-73
 
The SLE-73 meters have been designed exclusively for applications where a progressive counting of impulses is required. They feature two entry ports: counting and with a programmable function that can be used for resetting the meter to zero or stopping / changing its direction of travel (as required). The built-in entry port divisor with programmable value from 1 to 9999, along with an adjustable decimal point, permits a simple transfer of incoming impulses into the units.
SLI-73
 
The SLI-73 counters have two independent counting inputs that can operate in various configurations. A programmable function input enables changing the operating mode of the counting inputs or stopping the count. Controlling external equipment can be achieved by an in-built relay or OC output with programmable triggering thresholds. The counters are fully and easily configurable to the customer needs via the buttons on the front panel.
SLB-94
 
 
Counter SLB-94 makes possible counting in three separate, internal registers, defined as a current value, number of cycles and balance (total quantity). Counter is equipped with 2 relays, with independently defined switch-on actuation set points, which can be used for controlling of external devices. Relay number 1 is assigned to current value register; relay number 2 is assigned to register of counting cycles. Counter SLB-94 is equipped with one counting input and three independent reset inputs, assigned to registers of current values, cycles and balance, respectively.
SLN-94
 
A basic advantage of the SLN-94 counters is an exceptionally easy setting change. The changing is performed by 3 buttons located under each decade of the SV threshold value display (green). The current value can be read on the PV display (red). Consequently, the counter operator is able to change the settings quickly and easily. The counting can be performed up-down or down-up, and the control is by means of the relay output.
SLIK-94
 
The SLIK-94 counter is a cross between the existing SLI-94 and SLK-94. The device has two independent counting inputs that can operate in various configurations. A programmable function input enables changing the operating mode of the counting inputs (up-down and down-up or quadrate) or stopping the count. The SLIK-94 counter features an independent reset input. It has 2 or 4 relays with programmable activation thresholds, which can be used to control external equipment.
SLK-73
 
The SLK-73 is a 6-digit quadrate counter with one relay or transistor output (OC). In the enhanced resolution mode, it can count 4 pulses per quadrate cycle. Full configuration of the counters according to the needs can easily be performed by means of the front panel buttons.
SLK-94T
 
The SLK-94T counters are intended for tandem operation with the incremental encoders featuring quadrate outputs. The counters feature four relays with independently settable activation thresholds which can be used to control external devices in one of two available operation modes. The counters also have an independent reset input.

 

©Industrial Temperature Sensors Ltd.      

Ph.00353-45-898164     Fax.00353-45-896521