RTD PT100 Insert With Solid Drilled Flanged Thermowell. Full temperature sensor & thermowell assemblies. Consisting of a temperature sensing element housed in a stainless steel protective sheath and are spring loaded to ensure bottoming. They can be terminated with termination block, 4/20mA temperature transmitter or with flying leads to connect to existing unit. Available with PT100 Class A or Class 1/10th. Solid drilled bar stock flanged thermowells in various sizes & materials.
Performance characteristics
- Pt100 accuracy class (EN 60751)
- A (± 0.15 °C at 0 °C)
- ± (0.15 + 0.002 × t)°C
- 1/3 B (± 0.1 °C at 0 °C)
- ± 1/3 × (0.3 + 0.005 × t)°C
- 1/10 B (± 0.03 °C at 0 °C)
- ± 1/10 × (0.3 + 0.005 × t)°C
- Pt1000 accuracy class (EN 60751)
- A (± 0.15 °C at 0 °C)
- ± (0.15 + 0.002 × t)°C
- 1/3 B (± 0.1 °C at 0 °C)
- ± 1/3 × (0.3 + 0.005 × t)°C
- Thermal response time, T50
- ≤ 1.5 s , Ø3 mm
- ≤ 6.1 s , Ø6 mm
- ≤ 7.6 s , Ø8 mm
Operating Temperature
- Standard -70C + 250C
- High Temperature 600C
- Cryo -196C + 250C
Sensor Diameter
- Standard 6mm
- Options 3mm or 8mm
Sensor length
- Configurable
Sensor tube material
- AISI 316L (1.4404)
Surface roughness wetted parts
- Ra ≤ 0.8 µm
Ambient conditions
- Degree of protection (EN 60529)
- IP 65
Storage Temperature
- -40C + 80C
Humidity
- ≤ 100 % RH , condensing
Vibration (sinusoidal) (EN 60068-2-6)
- 1.6 mm p-p (2 … 25 Hz), 4 g (25 … 100 Hz), 1 octave / min.
Output signal
- Without transmitter
- 1 x Pt100, 3-wire
- 1 x Pt100, 4-wire
- 2 x Pt100, 3-wire
- 1 x Pt1000, 3-wire
- 2 x Pt1000, 3-wire
- With transmitter
- 4 … 20 mA , 2-wire Loop Powered
- 4 … 20 mA , 2-wire + HART® Loop Powered
Termination
- Ceramic Terminal Block
- Transmitter
- Free Leads
Optional Housing
- Style Selectable
- Material Selectable
Accessories
- Nipple Union Nipple Standard 60mm
- Nipple 10mm…40mm
- Threaded Lag ½”BSP or NPT length configurable
- Tri-Clover Lag ½”….4” length configurable
Compliance and approvals
- EMC EN 61326-1
Thermowell
- Shank Style
- Straight
- Tapered
- Shank Diameter
- Configurable
- Insertion length
- 20 … 450 mm
Process Flange Connection
- ANSI ½” to 3” 150lb to 1500lb
- DN 10 to 80 PN6 to PN80
Instrument Thread
- ½”BSP
- ½”NPT
Internal diameter
- 6.35
- 6.7
Thermowell material
- AISI 316L (1.4404)
- Hastelloy C
- Duplex 2205
- Super Duplex S32750
Surface roughness wetted parts
- Ra ≤ 0.8 µm
Performance characteristics
- Max. Temperature & Pressure
- Depending on:
- Thermowell design
- Dimensions
- Material
- Coating
- Flange pressure rating
- Process conditions
- Flow rate
- Density of medium
Certification Options
- 3.1b Material Cert
- Surface Finish Cert
- Wake Frequency Cert