RTD PT100 Insert With Solid Drilled Threaded Thermowell. Full temperature sensor & thermowell assemblies. Consisting of a temperature sensing element housed in a stainless steel protective sheath and are spring loaded to ensure bottoming. They can be terminated with termination block, 4/20mA temperature transmitter or with flying leads to connect to existing unit. Available with PT100 Class A or Class 1/10th. Solid drilled bar stock flanged thermowells in various sizes & materials.
Performance Characteristics
- Pt100 accuracy class (EN 60751)
- A (± 0.15 °C at 0 °C)
- ± (0.15 + 0.002 × t)°C
- 1/3 B (± 0.1 °C at 0 °C)
- ± 1/3 × (0.3 + 0.005 × t)°C
- 1/10 B (± 0.03 °C at 0 °C)
- ± 1/10 × (0.3 + 0.005 × t)°C
- Pt1000 accuracy class (EN 60751)
- A (± 0.15 °C at 0 °C)
- ± (0.15 + 0.002 × t)°C
- 1/3 B (± 0.1 °C at 0 °C)
- ± 1/3 × (0.3 + 0.005 × t)°C
- Thermal response time, T50
- ≤ 1.5 s , Ø3 mm
- ≤ 6.1 s , Ø6 mm
- ≤ 7.6 s , Ø8 mm
- Operating Temperature
- Standard -70°C + 250°C
- High Temperature 600°C
- Cryo -196°C + 250°C
- Sensor Diameter
- Standard 6mm
- Options 3mm or 8mm
- Sensor Length
- Configurable
- Sensor Tube Material
- AISI 316L (1.4404)
- Surface Roughness Wetted Parts
- Ra ≤ 0.8 µm
- Ambient Conditions
- Degree of Protection (EN 60529): IP 65
- Storage Temperature
- -40°C to +80°C
- Humidity
- ≤ 100% RH, condensing
- Vibration (sinusoidal) (EN 60068-2-6)
- 1.6 mm p-p (2 … 25 Hz), 4 g (25 … 100 Hz), 1 octave / min.
- Output Signal
- Without Transmitter
- 1 x Pt100, 3-wire
- 1 x Pt100, 4-wire
- 2 x Pt100, 3-wire
- 1 x Pt1000, 3-wire
- 2 x Pt1000, 3-wire
- With Transmitter
- 4 … 20 mA , 2-wire Loop Powered
- 4 … 20 mA , 2-wire + HART® Loop Powered
- Without Transmitter
- Termination
- Ceramic Terminal Block
- Transmitter
- Free Leads
- Optional Housing
- Style: Selectable
- Material: Selectable
- Accessories
- Nipple Union Nipple: Standard 60mm
- Nipple: 10mm…40mm
- Threaded Lag: ½” BSP or NPT length configurable
- Tri-Clover Lag: ½”….4” length configurable
- Compliance and Approvals
- EMC: EN 61326-1
Thermowell
- Shank Style
- Straight
- Tapered
- Shank Diameter
- Configurable
- Insertion Length
- 20 … 450 mm
- Process Thread
- ½” BSP or NPT
- ¾” BSP or NPT
- 1” BSP or NPT
- Instrument Thread
- ½” BSP
- ½” NPT
- Internal Diameter
- 6.35
- 6.7
- Thermowell Material
- AISI 316L (1.4404)
- Hastelloy C
- Duplex 2205
- Super Duplex S32750
- Surface Roughness Wetted Parts
- Ra ≤ 0.8 µm
- Performance Characteristics
- Max. Temperature & Pressure
- Depending on thermowell design:
- Dimensions
- Material
- Coating
- Flange pressure rating
- Process conditions:
- Flow rate
- Density of medium
- Depending on thermowell design:
- Max. Temperature & Pressure
- Certification Options
- 3.1b Material Cert
- Surface Finish Cert
- Wake Frequency Cert