These sensor assemblies are generally supplied to suit thermo pockets or thermowells but are also supplied as replacements or to suit existing thermo pockets & thermowells. It consists of a temperature sensing element housed in a stainless steel protective sheath and are spring loaded to ensure bottoming. They can be terminated with termination block, 4/20mA temperature transmitter or with flying leads to connect to existing unit. Available with PT100,PT1000,Thermocouple or NTC Thermistor.
Performance characteristics
Pt100 accuracy class (EN 60751)
A (± 0.15 °C at 0 °C)
± (0.15 + 0.002 × t)°C
1/3 B (± 0.1 °C at 0 °C)
± 1/3 × (0.3 + 0.005 × t)°C
1/10 B (± 0.03 °C at 0 °C)
± 1/10 × (0.3 + 0.005 × t)°C
Pt1000 accuracy class (EN 60751)
A (± 0.15 °C at 0 °C)
± (0.15 + 0.002 × t)°C
1/3 B (± 0.1 °C at 0 °C)
± 1/3 × (0.3 + 0.005 × t)°C
Thermal response time, T50
≤ 1.5 s , Ø3 mm
≤ 6.1 s , Ø6 mm
≤ 7.6 s , Ø8 mm
Operating Temperature
Standard -70C + 250C
High Temperature 600C
Cryo -196C + 250C
Sensor Diameter
Standard 6mm
Options 3mm or 8mm
Sensor length
Configurable
Sensor tube material
AISI 316L (1.4404)
Surface roughness wetted parts
Ra ≤ 0.8 µm
Ambient conditions
Degree of protection (EN 60529)
IP 65
Storage Temperature
-40C + 80C
Humidity
≤ 100 % RH , condensing
Vibration (sinusoidal) (EN 60068-2-6)
1.6 mm p-p (2 … 25 Hz), 4 g (25 … 100 Hz), 1 octave / min.
Output signal
Without transmitter
1 x Pt100, 3-wire
1 x Pt100, 4-wire
2 x Pt100, 3-wire
1 x Pt1000, 3-wire
2 x Pt1000, 3-wire
With transmitter
4 … 20 mA , 2-wire Loop Powered
4 … 20 mA , 2-wire + HART® Loop Powered
Termination
Ceramic Terminal Block
Transmitter
Free Leads
Optional Housing
Style Selectable
Material Selectable
Accessories
Nipple Union Nipple Standard 60mm
Nipple 10mm…40mm
Threaded Lag ½”BSP or NPT length configurable
Tri-Clover Lag ½”….4” length configurable
Compliance and approvals
EMC
EN 61326-1